Used tactrix openport 2.011/2/2023 Tactrix Openport 2. Beschreibung: The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. EDIABAS supports J2435-1 passthru and a compliant cable, like a Tactrix OpenPort 2.0 cable should work on any model without modification.Īnd it should work with ISTA online at for diagnostics and programming.ĭOH! I just bought a USB cable on eBay, from a seller in Ontario. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus. This is one reason I'm planning to get a J2435-1 compliant cable and try it out (to be used in the times I don't want to break out the big orange OPS head). It depends on the application and vehicles you are using it in, some older chassis cars have two K-Lines, one on pin 7 and one on pin 8 so most cables have pins 7-8 connected/soldered to accomodate that.Ġ7-09 D-CAN cars don't use pin 8 but still does use pin 7 so the cable continues to work fine, but in 09-10 BMW re-used the pin 8 position for ethernet, so if you have an interface that has pin 7-8 connected (and most of the ones you find on eBay and such do), you'll get errors trying to communicate with the car because of the ethernet connection at pin 8 interfering with the D-CAN connection on pin 7. I thought 06s just needed Kcan and post 06 needs Dcan. Interested but why do you need to solder anything?
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |